Network Router User Manual

Mesh Enabled Access EWR/PWR Users Guide

the access account may be used for monitoring the status of the device.

The installation procedure described here requires Administrator access. Alternatively, all of the

parameters that are provisioned via the web page may be provisioned via MeshManager

instead.

The password for the admin account should be changed during installation. The Access or

Normal User account password can be changed by the Administrator.

NOTE: If you are running a EWR/PWR as a standalone device, the configuration web page can

be reached by connecting a PC to the wired interface.

Figure 3-1 Enter Network Password Initial Web Page Authentication Dialog