Network Router User Manual

EWR (PWR) Device Administration (Super User Login) Page Fields
Field Name Field Description Field Default Value
System Name
This is the name of the device as shown by
MeshManager
Assigned by
Network
Administrator
RDATE Server IP
Address
The IP address of the RDATE server. This is
usually the MiSC when operating in
infrastructure mode. The RDATE server
provides the current date to the EWR/PWR.
The EWR/PWR can operate without an RDATE
server.
172.31.0.20
Wired Interface
Address
The EWR/PWR will tell the attached Ethernet
devices to use this address for the default
gateway, and the EWR/PWR will use the
address when accessing the local Ethernet
segment.
MAC-derived
Wired Interface
Subnet Mask
This is the subnet mask for the local Ethernet
segment.
255.255.0.0
DHCP Lease Time
This is the duration (in seconds) of the DHCP
leases that the EWR/PWR offers to the
attached Ethernet devices.
300
Device Priority
The Device Priority provisioning area allows the
operator to set the priority assigned to wireless
messages transmitted by this device. A priority
of 7 is the highest priority setting.
Levels 0-7 are
available, based on
your configuration as
set by the Network
Administrator.
Geo Settings
The Geo Settings area allows the operator to
enable and disable the Geo Reporting feature
(if provisioned), as well as control the
frequency of reports and provision the
destination server to which those Geo reports
will be sent.
NA
The External Device Provisioning frame of this web page is described in
Section 3.4.
A similar screen will be displayed for the access account (the web page will indicate Normal
User Login). Normal users can change only those settings for which they have system
privileges.
3.2.4.1 Viewing the EWR Device Configuration Tab as a Normal User
The Normal User account may only view most of the device configuration information provided
in the Configuration tab. The Geo Reference section is the only section within the Configuration
18