Network Router User Manual

Mesh Enabled Access EWR/PWR Users Guide
4.6 Upgrading the Device Firmware
The web interface for the device also provides the ability to upgrade the firmware on-site. To
use this feature, you must have an upgrade file from a released upgrade package.
When upgrading to version 7.5.0.0 from any prior SBC release via the web page, the web page
will show upgrade failure while the upgrade is still in progress in the background. In such cases,
there is no clear indication of when the upgrade is finished. It is recommended to perform an
upgrade via MeshManager and wait until the connection to the device (SNMP) is reestablished.
When the Upgrade Device Firmware function is selected from the MEA Device Administration
Home Page, the device will present the following web page:
Figure 4-10. Update Device Firmware Web Page
This page allows entry of the name (and path) of the upgrade file. Once the correct filename has
been entered, the device will prompt for confirmation:
33