User Guide Modem 3460

3460 Fast’R
B-2
E Echo Async AT Commands to Terminal
E0 =Disabled
E1 =Enabled. The modem echoes asynchronous commands
to the computer.
H Busy Out Test
H0 =End Test. If busy out is enabled, disconnects the busy
out condition. In escape mode, disconnects the modem.
H1 =Initiate test. Makes the modem appear busy to incom-
ing calls.
I Display Software Information
I0 =Display 336
I1 =Display 000
I2 =Display OK
I3 =Display product model
I4 =Display product model
I9 =Display reason for last disconnect
L Speaker Volume
L0 or L1 =Soft
L2
=Medium
L3 =Loud
M Speaker Control
M0 =Speaker always off
M1
=Speaker on, when dialing
M2 =Speaker always on
M3 =Security: Speaker on only during training
O Enter On-Line (Data) Mode
(Applies when modem is in command mode and
attached to remote modem)
O0 =Enter on-line (data) mode
O1 =Enter on-line (data) mode and retrain
AT Command Set (continued)
Command Option Description
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.