User Guide Modem 3460

3460 Fast’R
B-5
*
BK Break-Signal Receipt Handling
Controls how the modem handles the break signal in
reliable and auto-reliable data modes. Break signals are
sent to the computer for a 1-second duration.
0 =Destructive Expedited: modem passes break to remote
site immediately; deletes all its buffered data.
1 =Nondestructive Expedited: modem passes data to
remote site immediately
2 =Standard Non-expedited Non-destructive: modem
passes Breaks in sequence with any buffered data
*
CA Call-Answering Mode
Applies in leased-line operation
0 =Originate: modem does not generate answer-back tone
when called
1 =Answer: modem generates answer-back tone when
called
2 =Auto-Answer in Originate Mode: modem generates
answer-back tone when called; becomes Originate
modem when call established
*
CL Async Character-Length in Synchronous Direct
(No-Buffering) Mode
0 =8-bit Baudot code
1 =9-bit ASCII code, no parity
2 =10-bit ASCII code with parity bit or EBCDIC code
without parity bit
3 =11-bit EBCDIC code without parity bit
*
CM Select Connect Message
Takes effect in call-progress reporting
0 =Display computer rate
1 =Display modem Receive rate
2 =Display modem Transmit rate
AT Command Set (continued)
Command Option Description
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.