User Guide Modem 3460

3460 Fast’R
B-11
4 =2 hours
5 =4 hours
*
LF Dial Line Filter
Enables the modem to improve performance on long
local loops on dial lines. Site-specific.
0 =Optimize for long local loops
1 =Works best on some medium loops
2
=Optimized for typical short and medium local loops
3 Not recommended
*
LN Link Telephone Numbers
Lets you link telephone numbers stored in the modem’s
Phonebook. You can provide more than one number to
call in case one is busy. If a call fails and the number is
linked, the modem pauses and then calls the linked
number. NOTE: With this feature enabled, the modem
dials linked numbers before redialing the first number.
To link numbers, enter AT
*
LN, followed by the entry n
of the number you want to link from, a comma, and the
entry m of the number to link. Example: AT
*
LN2,4.
Here, 2 is linked to 4. To clear this link, enter AT
*
LN2.
m, n Link number m to number n
*
LS Low-Speed Operation Protocol
Determines the low-speed modulation mode used when
a higher (V.34, V.32bis, V.32, or V.22bis) modulation
mode connection cannot be made while Mod=V.34
Auto, V32bis Auto or Auto V32.
The default option is country-specific.
0=Bell
1 =CCITT
*
LXn Transmit Level for Leased-Line Calls
n n=0 to 20 (negative sign is assumed) dB
AT Command Set (continued)
Command Option Description
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.