User Guide Modem 3460

3460 Fast’R
B-12
*
MD PSTN Signaling
Determines the modem’s disconnect signaling when
operating in the V.34, V.32bis, or V.32 (coded or
uncoded) modulation modes.
0 =Disable
1 =Enable
*
MM Modulation Mode
Determines the modulation mode used in data
transmission. Changing mode resets AT
*
MX
(Max Rate) and AT
*
MN (Min Rate) to their defaults for
the mode selected.
0 =V.34 Auto (Dial Only)
1=V.34 Only
2 =V.32bis Auto (Dial Only)
3 =V.32bis Only
4 =V.32 Auto (Dial Only)
5=V.32 Only
6 =V.32 Uncoded
7=V.23 Only
8 =V.22bis Only
9=V.22 Only
10 =212 Auto
11 =V.21 Only
12 =103 Only
13 =V.23 Half Duplex (Dial Only)
*
MN Minimum Rate
Sets the minimum communication rate.
0 =75 BPS
1 =300 BPS
2 =600 KBPS
3 =1.2 KBPS
AT Command Set (continued)
Command Option Description
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.