User Guide Modem 3460

3460 Fast’R
B-14
9=14.4 KBPS
10 =16.8 KBPS
11 =19.2 KBPS
12 =21.6 KBPS
13 =24.0 KBPS
14 =26.4 KBPS
15 =28.8 KBPS
16 =31.2 KBPS
17 =33.6 KBPS
*
NA Network Control (NC) Address
Specifies a modem’s network-management identifier.
Note: if this command is issued while the modem is
attached to a network-management system, the modem
responds “NETWORK MANAGEMENT INHIBITED”
and does not change its address.
0 Default. Not a valid operating address.
1-255 Available options
*
NB Buffer Option
Specifies the size buffers that store data received from a
local computer. Use this parameter if computer-to-
computer flow control is enabled, to reduce the amount
of data sent to the remote computer when a flow-off
condition is received at the local computer.
0
=Regular. Normal capacity buffers.
1 =Reduced. Reduced sized buffers, allowing less data to
accumulate in the modem.
*
ND Display Stored Telephone Number
n Telephone Number n, where n is 1-4.
AT Command Set (continued)
Command Option Description
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.