User Guide Modem 3460

3460 Fast’R
B-18
*
RE Initiate/Terminate Restoral
The originating modem determines when to initiate
restoral.
0
=Disable
1=NM/Fast’RVu Only
2 =NM/Fast’RVu/DTR
3 =NM/Fast’RVu/DTR/ACU
4 =NM/Fast’RVu/Auto
*
RP Parity
Determines the method of checking for correct data
transmission, applied to asynchronous and character-
synchronous data formats.
0
=V.25bis
1=Even
2=Odd
3=Mark
4=Space
*
RR Restoral Auto-Redial
Determines whether the originating modem can
automatically redial, while in restoral, upon call failure
or carrier loss.
0
=Disable. Prevents modem from redialing automatically.
1 =Enable
*
RQ Abort Remote Configuration
Ends a remote-configuration session. Remote changes
are not saved. Both modems return to data mode.
*
RS RTS Control
Determines how the modem interprets the RTS signal on
EIA/TIA 232-D Pin 4 (V.24 Circuit 105).
0 =Normal. The computer controls data transmission with
RTS.
AT Command Set (continued)
Command Option Description
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.