User Guide Modem 3460

3460 Fast’R
B-21
*
VC V.25bis Character Code
0 =ASCII
1=EBCDIC
*
VF V.25bis Format
0 =BitSync
1 =CharSync
*
VI V.25bis Synchronizing Idle Signal
0=Mark
1 =Character
*
VR V.25bis Response
0=None
1 =V.25bis
2=V.25 Rate
3=Val Only
*
XC Reliable Message
Applies to Reliable and Auto-Reliable data transfer
modes. The local modem can send a reliable message to
the computer with the normal connect message if both
modems negotiated a reliable connection.
0 =Disable.
1 =Short-Form Message Code. The modem sends a
message to the computer when a reliable connection is
successful. The message indicates the local computer-to-
modem data rate.
2 =Long-Form Message. The modem sends a message to
the computer when a connection is successful. The
message indicates the local computer-to-modem data
rate, and the error-correction and data-compression
schemes.
AT Command Set (continued)
Command Option Description
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.