User Guide Modem 3460

3460 Fast’R
B-28
&Y Power Up in Option Set
0
=Old. On power up the modem uses the last saved
option set.
1 =1. On power up the modem uses Option Set 1.
2 =2. On power up the modem uses Option Set 2.
&Znn=1 - 4 Select Phonebook Entry to Enter
Lets you store a telephone number in the modem’s
Phonebook, up to 50 characters. Enter AT&Z or
AT
*
CN, the entry (1-4), a comma, and the telephone
number. For example, to store the number
1-222-555-444 in Entry 3, enter:
AT
*
CN3,12225554444<CR>
If you enter AT&Z or AT
*
CN without specifying:
•An entry, the modem stores the number in Entry 1.
• A telephone number, the specified entry’s telephone
number is deleted.
+F Commands
+F commands control fax operation.
For all fax parameters:
•The AT+F[parameter]? command returns the valid options for the parameter, or if the
parameter is not supported, it returns ERROR. An example, showing the +FCLASS
parameter, is below.
•The AT+F[parameter]=? command returns the current option for the parameter, or if
the parameter is not supported, it returns ERROR. An example, showing the
+FCLASS parameter, is below.
+FCLASS? Service Class.
Reads the modem’s Service Class.
0 Data modem
1 Service Class 1 fax modem
2.0 Service Class 2.0 fax modem
AT Command Set (continued)
Command Option Description
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.