User Guide Modem 3460

3460 Fast’R
C-11
The enclosure has two female 8-pin DIN connectors for connection to a
network management system.
The enclosure has one power interface connector.
The off-line configuration (OLC) button is on the front of the modem
card.
Pressing the button makes the modem enter command mode, in which
you can change configuration options in synchronous or leased line
environments.
Network Management Interface Pin-outs
Pin NM OUT NM IN
2 TXD TXD
3 RXD RXD
4RTS RTS
7 Signal Ground Signal Ground
8 DCD DCD
Pins not listed here are not used.
Power Interface
Power Type Connector
AC Industry Standard
DC Barrier strip
Changing a Configuration With the OLC Button
Step Stage
1.
Change one or more configuration options.
2.
Enter the Save to Option Set command (AT&Wn, where n is 1 or 2).
3.
Enter the Option Set to Power Up In command (AT&Yn, where n is:
0 for last-loaded option set; 1 for Option Set 1, or 2 for Option Set 2)
4.
Press the OLC button. The modem restarts and powers up using the
selected configuration option set.