User Guide Modem 3460

3460 Fast’R
1-3
Installing a Stand-Alone Modem
In the shipping carton, locate the items shown in Figure 1-1.
Figure 1-1. 3460 Fast’R Stand-Alone Modem Parts
Installing a Stand-Alone Modem
Step Action
1. Compare the modem package contents to Figure 1-1. If a part is
missing, contact your nearest Motorola representative, or:
• In the U.S.A.—Motorola Customer Administration, 20 Cabot
Blvd., Mansfield, MA 02048. [phone].
• Outside the U.S.A.—Motorola distributors are listed on our
Web site, at: http://www.mot.com/MIMS/ISG/
2. Plug the modem power-transformer cable into the modem’s
AC~ connector and then into a power supply outlet.
3. Connect a cable from a computer serial port to the modem’s
DTE connector.
This User’s Guide
Ferrite Beads (2)
RJ11 Telco
Cable
Power Transformer
3460 Fast'R Stand-Alone Modem
(With Some Units)
(Some modem front panels
differ from the one shown.)