User Guide Modem 3460

3460 Fast’R

3-6

Option-Set Parameter Default Options

This section lists the pre-configured option-set parameter options.

Table 3-1. Option-Set Default Options

Command

Pre-Configured Default Option

Option Set 1

(Asynchronous)

Option Set 2

(Synchronous)

Async Echo ATE1=On ATE1=On

Result Code ATQ0=Enable ATQ0=Enable

Result Form ATV1=Verbose ATV1=Verbose

Longspace Disconnect ATY1=On ATY0=Off

DCD Control AT&C0=High AT&C1=Normal

DTR Control AT&D2=Disconnect AT&D0=High

Line AT&L0=Dial AT&L1=2W Lease

AT Form AT&M0=Async AT&M1=Sync Data

CTS Control AT&R0=Async/Sync AT&R1=Normal

Remote Access AT&RA1=On AT&RA1=On

DSR Control AT&S0=High AT&S1=Normal

Clock AT&X0=Internal AT&X0=Internal

ACU Protocol AT

*AC1= AT AT*AC0=None

Adaptive Rate AT

*AP1=On AT*AP1=On

V.34 Asymmetric Rate AT *AR1=On AT*AR1=On

Answer Restoral AT *AS0=LL FAIL AT*AS0=LL FAIL

Break Handling AT

*BK0=Destructive AT*BK0=Destructive

Mode AT *CA0=Orig AT*CA0=Orig

Direct Mode Async

Character Length

AT *CL2=10 bits AT*CL2=10 bits

Connect Message AT

*CM0=DTE Rate AT*CM0=DTE Rate

Default Dial AT *DA0=Off AT*DA0=Off

DTE (Terminal) Rate AT *DE23=Auto AT*DE23=Auto

Lease to Dial

Threshold

AT *DI0=Low/Fast AT*DI0=Low/Fast

Parameters and options shown shaded gray vary by country. For details, refer

to Appendix B of the 3460 Fast’R Reference Guide.

Parameter option does not affect normal operation.