User guide

45 Mbps Backhaul User Guide
Issue 3, December 2004 Page 44 of 113
The 45 Mbps Backhaul operational software requires a license key to enable the wireless bridging capability
and programs region code specific parameters in to the unit.
Figure 16 License Key Data Entry
A license key is programmed into each unit during production and can be found written on the Configuration
Data Summary Label which is attached to the Quick Install Guide. If subsequently the license key has been
mislaid, replacement keys can be applied for online.
If a valid license key is not detected in the unit’s non-volatile memory then the user is prompted to enter a valid
key. It should be noted that 45 Mbps Backhaul units are shipped as link pairs and as such valid license keys are
entered during the production process. Hence the user should never see the Software License Key screen
(Figure 16).
To enter a license key simply type or paste the license key into the data entry box and click the ‘validate license
key’ button.
6.3.3.2 Internet Protocol Configuration
Step 1 of the installation wizard requires the installer to enter the Internet Protocol (IP) configuration.