User guide

45 Mbps Backhaul User Guide
Issue 3, December 2004 Page 49 of 113
6.3.3.4 Confirm Configuration
Step 3 of the installation wizard allows the installer to review and confirm the installation information before
committing the information to non-volatile memory (Figure 20)
Figure 20 Installation Wizard Confirm Configuration.
If all the settings are correct and appropriate click the “Confirm Configuration and Reboot Unit” button. All the
attributes are committed to non-volatile memory. Immediately following the write to non-volatile memory the
unit is reset.
Note: If you have changed the Ethernet parameters you must reconnect using the correct network and address
settings.