Network Router User Manual

Release 11.0 Release Notes and User Guide Supplement
Issue 1, March 2011 Page 18
Figure 4: Certificate Management on SM's Configuration > Security tab
5.3.2 Using CNUT to distribute certificates to SMs
CNUT Release 3.20.16 supports distribution of certificates to SMs. Please see the CNUT
documentation for additional information.
5.4 CONFIGURING YOUR RADIUS SERVER FOR SM
AUTHENTICATION
Your RADIUS server will need to be configured to use the following:
o EAPTTLS as the Phase 1/Outer Identity protocol.
o If Enable Realm is selected on the SM’s Configuration > Security tab, then the same
Realm as appears there (or access to it).
o The same Phase 2 (Inner Identity) protocol as configured on the SM’s Configuration
> Security tab under Phase 2 options.