Network Router User Manual

Release 11.0 Release Notes and User Guide Supplement
Issue 1, March 2011 Page 37
8.6 PMP 400/430 AND PTP 200 DFS OPERATION BASED ON REGION
CODE
For reference, Table 14 shows operation based on Region Code, by frequency band and radio
platform. PMP 400 and PTP 200 are available in the 5.4-GHz frequency band. PMP 430 is
available in both the 5.4 and 5.8-GHz frequency band.
Note: The 4.9-GHz PMP 400 and PTP 200 are not shown as DFS operation does not apply to
these frequencies.
Table 14: PMP 400/430 and PTP 200 DFS operation based on region code
Region Code
1
Frequency
Radio Platform
AP
SM
5.4-GHz
PMP 400 & PTP 200
FCC/IC DFS
3
No effect
United States
5.8-GHz
PMP 430
No effect
No effect
5.4-GHz
PMP 400 & PTP 200
FCC/IC DFS
3
No effect
Canada
5.8-GHz
PMP 430
No effect
No effect
5.4-GHz
PMP 400/430 & PTP 200
ETSI DFS
4
ETSI DFS
4
Europe &
Spain
5.8-GHz
PMP 430
ETSI DFS
5
ETSI DFS
5
5.4-GHz
PMP 400/430 & PTP 200
ETSI DFS
4
No effect
Brazil
5.8-GHz
PMP 430
No effect
No effect
5.4-GHz
PMP 400/430 & PTP 200
FCC/IC DFS
3
No effect
Australia
5.8-GHz
PMP 430
No effect
No effect
5.4-GHz
PMP 400/430 & PTP 200
No effect
No effect
Russia
5.8-GHz
PMP 430
No effect
No effect
5.4-GHz
PMP 400/430 & PTP 200
No effect
No effect
India
5.8-GHz
PMP 430
No effect
No effect
5.4-GHz
PMP 400/430 & PTP 200
No effect
No effect
Other
5.8-GHz
PMP 430
No effect
No effect
4. In all cases set the Region Code to the region you are in and the equipment will
provide DFS consistent with that region’s regulations. For countries or regions not
listed, use a Region Code that provides DFS functionality and channels consistent
with your country’s regulatory requirements.
5. In some countries and regions, 5600 MHz to 5650 MHz is “notched” out to meet
requirements to not transmit in weather radar frequencies.
6. Complies with FCC Report and Order 03-287 and Industry Canada requirements.
7. Complies with ETSI EN 301 893 v1.3.1.
8. Complies with ETSI EN 302 502 v1.2.1.