user manual

Connecting the Base Station and Mains Adaptor

Note: The base station does not have a power switch.

Only use the mains adaptor supplied with your phone.

Installation

1. Thread the telephone cord and DC power cord

through the gap at the bottom between the base

and stand (as shown).

2. Insert the telephone line cord into the corresponding

socket on the base station.

3. Thread the two cords through the slot at the bottom

of the base.

4. Connect the mains power adaptor to the mains wall

socket and switch the power on.

5. Connect the telephone line cord to the telephone

socket.

The base station is now ready for use.