user manual

Installation

Connecting the Charger Unit

Plug the mains adaptor into the wall socket .

The charger unit is now ready to use.

Preparing the Handset(s)

Inserting and Char

ging the Batteries

Open the battery compartment, by pushing downwards on the cover.

Insert the 2 x AAA (600 mAh / 1.2V) Ni-MH re-chargeable

batteries supplied, observing the correct polarity.

If the batteries are inserted incorrectly

the handset will not operate and there is

also a possibility that the handset

may become damaged.

Push the battery cover back on until you hear it click into place.

Place the handset in the base station/charger unit to charge the batteries.

A confirmation beep and the charging indicator confirm that the handset is charging.

Note: Before first use, the batteries should be allowed to charge for at least 16 hours,

without interruption. If possible, only take the handset out of the base station when

charging is complete. This will help to guarantee optimum operation.

Note: To ensure no interruptions during the initial charging period, you may prefer to

connect the telephone line cord after charging so as not to be disturbed by any

incoming calls.

CAUTION : PLEASE DO NOT USE ALKALINE OR NON-

RECHARGEABLE BATTERIES. IT MAY CAUSE PERMANENT

DAMAGE TO THE UNIT. AND VOID THE WARRANTY.