user manual

Using theTelephone

During a call:

1. Press the key. To toggle between speakerphone mode on/off.

3. Press the key to end the call.

Taking calls

When an external call is received, all registered handsets ring and the LCD backlight

will be on during ringing. The display shows Incoming call.

The In-use / CID LED incoming call light on the base flashes.

Note: If you have subscribed to caller ID, the caller's name or number will be shown

(if available from the network).

Handset is in the base station/charger (auto-answer):

If auto-answer is set to on, the line will be automatically connected when you lift the

handset from the base/charger.

1. Lift the handset to answer the call.

Note: If auto-answer is set to off, lift the handset and press the key or the key

to answer the call.

Handset is not in the base station/charger:

1. Press the key or the key to answer the call.

Prefix Dialling

When prefix dialling is set to ON, the prefix number that you set will be dialled out

first whenever you make an external call. The prefix can be a number up to 5 digits.

You can use the prefix memory to store an area code that you frequently use, for

example 0207 or 08457, to save you dialling it each time you make a call.

Place the handset back in the base station/charger unit. The call will disconnect

and go back to standby status.