Stereo System User Manual

Overview
DSP56012 Architectural Overview
MOTOROLA DSP56012 User’s Manual 1-15
1.3.3.2 X Data Memory
The on-chip X data memory shown in Table 1-4 is 24 bits wide. Addresses are
received from the XAB, and data transfers to the Data ALU occur on the XDB.
1.3.3.3 Y Data Memory
The on-chip Y data memory shown in Table 1-4 is 24 bits wide. Addresses are
received from the YAB, and data transfers to the Data ALU occur on the YDB.
1.3.3.4 On-Chip Memory Configuration Bits
Through the use of bits PEA and PEB in the OMR, four different memory
configurations are possible. These configurations provide appropriate memory sizes
for a variety of applications (see Table 1-4). Section 3 provides detailed information
about memory configuration.
P: $0050 0–2 DAX Transmit Underrun Error
P: $0052 0–2 DAX Block Transferred
P: $0054 Reserved; available for Host Command, see p. B-5–B-6.
P: $0056 0–2 DAX Transmit Register Empty
P: $0058 Reserved; available for Host Command, see p. B-5–B-6.
: Reserved; available for Host Command, see p. B-5–B-6.
P: $007E Reserved; available for Host Command, see p. B-5–B-6.
Table 1-4 Internal Memory Configurations
No Switch
(PEA = 0
PEB = 0)
Switch A
(PEA = 1
PEB = 0)
Switch B
(PEA = 0
PEB = 1)
Switch A+B
(PEA = 1
PEB = 1)
Program RAM 0.25 K 1.0 K 1.75 K 2.5 K
X RAM 4.0 K 3.25 K 3.25 K 2.5 K
Y RAM 4.25 K 4.25 K 3.5 K 3.5 K
Program ROM 15 K 15 K 15 K 15 K
X ROM 3.5 K 3.5 K 3.5 K 3.5 K
Y ROM 2.0 K 2.0 K 2.0 K 2.0 K
Table 1-3 Interrupt Starting Addresses and Sources (Continued)
Interrupt
Starting Address
IPL Interrupt Source