- motorola Installation and Operation Manual Portable Radio GP68

Model ST-865M3 SmarTrunk II™ Logic Board

1.3.5 Mobile Operator Call

Routing code 9 calls the subscriber that is preprogrammed

as the Mobile Operator. This functions as though the sub-

scriber had used routing code 3 with the subscriber ID num-

ber of the Mobile Operator. The Mobile Operator is pro-

grammed by the System Operator/Manager.

1.3.6 Emergency Call

Routing code 0 causes the ST-852M to access line 1 and dial

the preprogrammed emergency phone number. The emer-

gency phone number is programmed by the System Opera-

tor/Manager.

See the ST-852M SmarTrunk II Digital Trunking Control-

ler Manual for details on programming the emergency num-

bers.

1.4 Originating A Call

This section describes the advanced SmarTrunk II dialing methods. Dialing

has an automatic five second time-out. If the time between pressing keys

in a dialing sequence exceeds five seconds, the ST-865M3 times out. A

low frequency beep will be heard and the dialing procedure must be

restarted. To clear out previously entered data and restart dialing, press

the # key.

A busy tone will be heard by the subscriber if connection is not possible.

This can occur if a radio channel is not available, or if the subscriber unit

is out of range. The subscriber must then retry the call at a later time, when

within range and a radio channel is available.