High Definition Tuner User Guide Model HDT100

Connecting your A/V Receiver, VCR and High Definition TV

Connect the component video cable supplied with the HDT100 to the

Y, Pb, and Pr connectors on your TV and HDT100.

2 Connect an optical digital audio cable to the OPTICAL connector on

the HDT100 and the

OPTICAL input connector on the A/V receiver.

3 Connect a video cable to the VIDEO connector on the HDT100 and

the

CABLE/TV VIDEO connector on the A/V receiver.

If your equipment supports it, S-Video connections may be used in

place of the standard composite video connections. In most cases,

S-Video offers a higher level of standard definition video quality than

composite video.

4 Connect a stereo audio cable to the VCR AUDIO OUT R and L

connectors on the A/V receiver and the

INPUT AUDIO R and L

connectors on the stereo VCR.

When using the Digital Audio output (

OPTICAL or SPDIF), the left / right

baseband audio connections to the A/V receiver are not needed.

5 Connect a stereo audio cable to the OUTPUT AUDIO OUT R and L

connectors on the stereo VCR and the

VCR AUDIO IN R and L

connectors on the A/V receiver.

6 Connect a video cable to the INPUT VIDEO connector on the stereo

VCR and the

VIDEO VCR OUT connector on the A/V receiver.

7 Connect a video cable to the OUTPUT VIDEO connector on the stereo

VCR and the

VIDEO VCR IN connector on the A/V receiver.

8 Connect a video cable to the INPUT VIDEO connector on the stereo TV

and the

TV/MONITOR OUTPUT VIDEO connector on the A/V receiver.

To switch between viewing input from your VCR and input from your

HDT100, change your TV’s video inputs.