User’s Guide Wi-Fi® Video Baby Monitor Models: MBP843CONNECT, MBP843CONNECT-2, MBP843CONNECT-3, MBP843CONNECT-4 The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Wi-Fi® Video Baby Monitor! Thank you for purchasing the Wi-Fi® Video Baby Monitor. Now you can view and hear your baby sleeping in another room or you can monitor your older children in their play room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 10 11 12 1 14 15 2 6 19 7 3 16 1. 2. 3. 4. 5. 6. 7. 8. 4 8 5 9 13 17 LCD display Up Key + Normal Mode: Tilt Up Menu Mode: Up Down Key Normal Mode: Tilt Down Menu Mode: Down Left Key < Normal Mode: Pan Left Menu Mode: Left Right Key > Normal Mode: Pan Right Menu Mode: Right Menu Key M Press to open the Menu options. OK Key O Video ON/OFF Key V Press to turn OFF the LCD display. Press again to turn ON the LCD display. 18 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.
Parent unit menu icons (cont’d) Brightness Level Control (8 Levels) & Lullaby Control (5 Song Selections) m Alarm Setting (6h, 4h, 2h, Off) Temperature scale selection (ºC / ºF). Readings display in BLUE, but turn RED if > 29 ºC / 84 ºF or < 14 ºC / 57 ºF. Displays HH ºC / ºF if > 36 ºC / 97 ºF. Displays LL ºC / ºF if < 1 ºC / 34 ºF. Cam Control (scan, view, add, delete) V View multiple cameras on screen (Picture in Picture). Available when you have more than 1 Baby Unit (Camera).
1. 2. Safety Instructions ..................................................................................... 6 Getting Started.......................................................................................... 9 2.1 2.2 2.3 2.4 3. Using the Wi-Fi® Video Baby Monitor.................................................... 12 3.1 3.2 3.3 3.4 3.5 3.6 4. Volume....................................................................................................... 13 Brightness ........................
1. Safety Instructions WARNING: Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (1m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.
ENGLISH Wi-Fi® CAMERA UNIT SET UP & USE: • Choose a location for the Wi-Fi® Camera Unit that will provide the best view of your baby in his/her crib. • Place the Wi-Fi® Camera Unit on a flat surface, such as a dresser, bureau or shelf, or mount the Unit on a wall securely using the keyhole slots under the stand. • NEVER place the Wi-Fi® Camera Unit or cords within the crib.
CAUTION There is a risk of explosion if the battery is replaced by an incorrect type. Only use a Ni-MH rechargeable battery pack with rating: 3.6V, 900mAh. Dispose of used batteries according to the instructions.
2.1 ENGLISH 2. Getting Started Camera Unit Power Supply Power adapter plug Switch to turn ON the camera 1. 2. 3. 2.2 Insert the Power Adapter plug into the micro USB socket at the back of the Camera Unit. Connect the other end of the Power Adapter into a suitable electrical outlet. Switch the ON/OFF button to the ON position. The colored LED will now start flashing slowly. Parent Unit Battery Installation Black 1. 2.
3. 2.3 Gently tighten the screw in a clockwise direction using a small cross head or flat end screwdriver. Small cross head or flat end screwdriver Parent Unit Power Supply Micro USB Socket Micro USB Plug IMPORTANT Installing the rechargeable battery pack and charging it fully before use is recommended. This will allow the unit to operate on battery in the event of a power failure. 1. 2. 3. 4.
0 When charging 1. During charging, the battery icon at the top right of the screen indicates that it is charging. If the Parent Unit is powered off while charging, a power plug icon is displayed for 5 seconds, followed by a battery icon for 45 seconds. The Blue LED at the top left corner lights up to indicate that the power adapter is plugged in. 2.4 Registration (Pairing) The Camera Unit is pre-registered to your Parent Unit.
3. Using the Wi-Fi® Video Baby Monitor 3.1 Setting up • Place the Camera Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the Camera Unit's camera angle by rotating the camera up, down, left and right until you are satisfied with the image in the Parent Unit.
4.1 1. 2. 4.2 1. 2. 3. 4.3 1. 2. 3. 4. 4.4 1. 2. 3. 4.5 1. 2. 3. ENGLISH 4. Parent Unit Menu Options Volume Press the M button. The menu bar will pop up and is highlighted. Press the + UP button or - DOWN button to select the desired volume level from Level 0 ~8 . (The default Volume level setting is Level 4.) Brightness Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until & is highlighted.
4.6 Camera Control 4.6.1 Add (pair) a camera Press the M button and the menu bar will pop up. is highlighted. Press the < LEFT button or > RIGHT button until menu will pop up. The 3. Press the + UP button or - DOWN button to select , and press the O button to confirm. will pop up. 4. Press the + UP button or - DOWN button to select the desired Camera, and press the O button to start searching for a camera unit. The green audio level LED will flash rapidly while searching. 5.
Scan camera This function is only available when you have more than 1 Camera Unit (Camera). 1. 2. 3. 4. Press the M button and the menu bar will pop up. is highlighted. Press the < LEFT button or > RIGHT button until menu will pop up. The , and press the Press the + UP button or - DOWN button to select O button to confirm. The screen will then display images from the different registered cameras in a loop of , changing about every 12 seconds. TIP Quick Method to View Cameras.
5. System Requirements Web Portal • Windows® 7 • Mac OS® 10.7 • Chrome™ 24 • Internet Explorer® 9 • Safari® 6 • Java™ 7 • Firefox® 18.0 • Adobe® Flash® Player 15.0 Android™ System • Version 4.2 or above iPhone®/iPad® iOS • Version 7.0 or above High Speed (Wi-Fi®) Internet • At least 0.6 Mbps upload bandwidth per Camera (you can test your internet speed on this site: http://www.speedtest.
ENGLISH 6. Getting started - Connecting Devices How does it work? MBP843 CONNECT Wi-Fi® Router View your Camera from any compatible device remotely Hubble Service When a user tries to access the Camera, our secure server authenticates the user’s identity and permits access to the Camera. 6.1 Setup Connect the Camera to the Power Adapter, then plug into an electrical outlet and make sure the ON/OFF Switch is in the ON position.
6.2 User Account and Camera Setup on Android™ Devices What you need • MBP843CONNECT Camera • Power adapter for the Camera • Device with AndroidTM system version 4.2 and above 6.2.1 Power ON and Connect the Camera • Connect the power adapter to an electrical outlet and insert the plug into the micro USB socket on the back of the Camera Unit. • Make sure that the ON/OFF switch is in the ON position. • The Camera’s Red LED flashes after the Camera has finished booting.
Add the Camera to your account on the top right corner of the screen to add camera. (Picture A2) Android™ • Tap ENGLISH 6.2.4 A2 • The following setup instructions will appear on the screen. (Picture A3) A3 • Plug in and switch on the camera, and wait for a couple of minutes for it to warm up. • Tap Continue when the Camera LED starts to blink.
• The following setup instructions will appear on the screen. (Picture A4) A4 • Press and hold the PAIR button on the bottom left edge of the Camera Unit for 3 seconds. You will then hear a beep tone, followed by a voice prompt indicating that the Camera is ready for pairing. • Tap Continue. • The App will automatically search for and connect to your Camera as shown in the pictures below. (Pictures A5, A6) • The blue/red color LED on the Camera Unit will flash.
Android™ ENGLISH • Select your Wi-Fi® Network, enter your password and then tap Connect. (Pictures A7, A8) A8 A7 • It will take a few minutes for the Camera to connect to the Wi-Fi® network before showing the connection status. (Pictures A9, A10) • If connection fails, please tap Retry and repeat the steps starting from 6.2.4. A9 A10 • Tap View Camera to view the video captured by the Camera Unit. The status indicator LED on the Camera Unit will flash in red/blue.
6.3 User Account and Camera Setup on iPhone®/iPad® What you need • MBP843CONNECT Camera • Power adapter for the Camera • iPhone® / iPad® with iOS version 7.0 and above 6.3.1 Power ON and Connect the Camera • Connect the power adapter to an electrical outlet and insert the plug into the micro USB socket at the back of the Camera. • Make sure that the ON/OFF switch is in the ON position. • The Camera's red LED flashes after the Camera has finished booting.
Add the Camera to your account on the top right corner of the screen to add camera. (Picture i2) iOS® • Tap ENGLISH 6.3.4 i2 • The following Bluetooth setup instructions will appear on the screen.
• Tap Settings and activate Bluetooth on your iPhone®/iPad®. (Pictures i4, i5) i5 i4 • Press the HOME key to return to the home screen, then tap on "Hubble for Motorola Monitors" App to resume setup. • The following setup instructions will appear on the screen. (Picture i6) Note that if Bluetooth is on, you will be brought to this step directly. i6 • Wait for a couple of minutes for the Camera Unit to warm up and tap Continue when the Camera LED indicator starts to blink.
iOS® ENGLISH • The following will appear on the screen. (Pictures i7, i8) i7 i8 • Name the location of your Camera Unit and tap Continue.
• The Camera Unit will search for the Wi-Fi® network (Picture i11) and display a list of available networks. (Picture i12) i12 i11 • Select your Wi-Fi® network and tap Continue. (Picture i13) • Enter your Wi-Fi® password and tap Next. (Picture i14) i13 i14 • It will take a few minutes for the Camera Unit to connect to the Wi-Fi® network before showing the connection status.
iOS® ENGLISH • If connection fails, tap Retry and repeat the steps starting from 6.3.4. i15 i16 • Tap View Live Camera to view the video captured by the Camera Unit. The LED indicator on the Camera Unit will light up in blue.
6.4 Camera Functions: 6.4.1 Connecting the Camera Unit to power • Connect the power adapter to an electrical outlet and insert the plug into the micro USB socket on the back of the Camera Unit. • Slide the ON/OFF switch to the ON position. The power indicator LED will light up in green. (Note: To switch off the device, slide the ON/OFF switch to OFF.) • Run the Hubble App on your smart device. 6.4.2 Overview of the Features on Hubble App Menu • Tap Cameras to access the camera list.
Tap to access the Melody menu and select one of the 5 pre-set melodies you wish to play on your Camera Unit. Temperature Measure The temperature reading from the temperature sensor at the back of the Camera Unit will display on the screen of your Android™ device. The readings will turn RED if the temperature goes beyond the High/Low temperature that was set in your Account. Two-way communication Tap to activate the function. Press the round button once to speak through the Camera Unit.
Camera Setting You can change the Camera settings by tapping on the Settings icon. • Tap Details to review Camera Name, Cloud Subscription, Change Image, Timezone, Camera Model, Firmware Version and Delete All Events. • Tap Notifications to set the sensitivity of Sound Detection, Motion Detection and to set Alerts for High temperature (Up to 33 oC or 91 oF) / Low temperature (down to 10o C or 50 oF). • Tap Settings to set Ceiling mount, Brightness and Volume. Add Camera Enter Add Camera procedures.
Working with PC/Notebook ENGLISH 6.5 • Go to https://app.hubbleconnected.com/#login Enter your User Name and Password, and then click Login if you have already created an account. • Click on the Camera list paired in your account via Android™ device or iPhone®/iPad®, and the Camera view will appear on screen. You can easily stay connected with your favorite people, places and pets with live video streaming. • On the website, you can change the Settings by following the menu instructions. 6.
7. Disposal of the Device (environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point.
Clean your Wi-Fi® Video Baby Monitor with a slightly damp cloth or with an antistatic cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the Wi-Fi® Video Baby Monitor with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. • Keep your Wi-Fi® Video Baby Monitor away from hot, humid areas or strong sunlight, and do not let it get wet.
9. Troubleshooting Display No display • Try recharging or replacing the battery pack. • Reset the units. Disconnect the battery pack of the Parent Unit and unplug the power supply of both the units, then plug them back in. • Is the unit turned on? Press and hold the POWER ON/OFF button P on the Parent Unit to turn it ON. • Is the correct camera selected? Change the camera number, if necessary. See 4.6.2 View a camera. • Is the video display turned on? Press the VIDEO ON/OFF button V to turn it on.
Noise interference on your Parent Unit • Your Camera and Parent Units may be too close to each other. Move them farther apart. • Make sure that there is at least 3 to 6 feet between the 2 units to avoid audio feedback. • The Camera Unit may go out of range if it is too far away. Move the Camera Unit closer to the Parent Unit. • Make sure that the Camera and Parent Units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. • Use of other 2.
Troubleshooting for Wi-Fi® Internet Viewing Category Problem Description / Error Solution Account I am unable to login Please check your user name and even after registration. password. Account Please ensure that you have I receive an error message saying: "Email registered with us. Tap Create Account to create an account. ID is not registered". Account What do I do if I forget Click on the "Forgot Password" link on my password? https://app.hubbleconnected.
When I am in "remote mode", the video stops after 5 minutes. How do I view for longer? When you are accessing your Camera via a network different from your home network (over the internet) your video times out after 5 minutes. You can click on the Camera again from the Android™/iOS application to start streaming again. If you are accessing from your webbrowser, then you can press on the Reload button to start viewing your Camera video stream again.
General What is the significance of LED flashing? A flashing LED indicates the following status: Slow flashing: 1. Your Camera is in setup mode. You can add the Camera to your account in this mode. Out of the box, the Camera is in Setup mode. To reset to Setup mode, press and hold the PAIR button on the bottom of the Camera untill you hear a beep. Slow flashing: 2. The Camera is either connecting to the router or has lost the link to the router. Please ensure that the Camera is in the Wi-Fi® signal range.
Please check your wireless router settings. For example, for Buffalo brand routers there is an option called Wireless Isolation. Please disable this option. Camera When I try to view the Camera, I get a prompt for Camera firmware upgrade. What should I do? Please upgrade your firmware. This takes around 5 minutes. We push upgrades from time to time to improve Camera features.
General What is the meaning of When you are accessing your Camera from the same wireless network (Home) "Local Camera" and in which it is configured, "Remote Camera"? it is a Local Camera. When you are accessing your Camera away from your home it is a Remote Camera. You may be using 3G, 4G or 4G LTE or a Wi-Fi® connection outside of your home. General How do I download the Android™: App for Android™ and - Open the Google Play Store on iOS devices? your Android™ device.
How many users can access the Camera at one time? Connectivity I found interference issues caused by my other webcam devices. Troubleshooting If you are accessing in Local Mode, two users are supported, after two users all streaming will go through the remote server. This allows for unlimited user access to a single Camera at one time. Video streaming performance is related to internet bandwidth, especially if you have 2 or more video streaming devices that are working through the same router.
10. General Information If your product is not working properly... 1. 2. 3. Read this User's Guide or the Quick Start Guide. Visit our website: www.motorolamonitors.com Contact Customer Service at US and Canada 1-888-331-3383 Email: support@motorolamonitors.com To order a replacement battery pack for parent Unit, contact customer service.
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Products Covered Consumer Products Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for ninety (90) days from the date returned to the consumer, whichever is longer.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services.
FCC and IC regulations FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CAN ICES-3(B)/NMB-3(B). WARNING Changes or modifications to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible.
11. Technical Specifications Camera Unit Wi-Fi® 802.11 b/g/n Image sensor Color CMOS 1M Pixels Lens f = 2.3 mm, F = 2.4 IR LED 8 pcs Power Adapter: Ten Pao International Ltd.
Frequency ENGLISH Parent Unit 2.4 GHz to 2.48 GHz Display 3.5" diagonal TFT LCD Display color 16.7M color LCD Brightness control 8 steps Volume control 8 steps Power Adapter: Ten Pao International Ltd. S003IU0500060; Input: AC100-240V, 50/60Hz 150mA; Output: DC5V, 600mA WARNING Use only the supplied power adapter. Battery: GPI GPRHCH93C021 Ni-MH AAA 3.6V 900mAh rechargeable battery pack Do not use non-rechargeable batteries for the Parent Unit.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Apple logo and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play, Android, and Chrome are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance.