Quick Start Guide

ManualsBrandsMotorola ManualsBabyfonMBP843CONNECT-3

US EN

A. Connect the Camera Unit to the power supply.

• Insert the Power Adapter plug into the micro

USB socket at the back of the Camera Unit.

• Connect the other end of the Power Adapter

into a suitable electrical outlet.

• Switch the ON/OFF button to the ON

position. The colored LED will now start

flashing slowly.

Power adapter plug

Switch to turn ON the camera

Red

Black

B. Parent Unit battery installation.

• The rechargeable battery pack supplied

should be installed so that the Parent Unit can

be moved without losing the link and picture

from the Baby Unit(s).

• Charge the battery in the Parent Unit before

you use it for the first time or when the Parent

Unit indicates that battery is low.

• Insert the wire tabs of the rechargeable

battery pack into the contact slots as shown

and fit the battery pack into the compartment.

QUICK START GUIDE

For a full explanation of all features and instructions, please refer to the User’s Guide.

1. Setting up your Wi-Fi

Video Baby Monitor

MODELS:

MBP843CONNECT

MBP843CONNECT-2

MBP843CONNECT-3

MBP843CONNECT-4

WARNING:

Strangulation Hazard.

Children have

STRANGLED in cords.

Keep this cord out of

the reach of children

(more than 3ft (1m)

away). Never use

extension cords with

AC Adapters. Only use

the AC Adapters

provided.

Summary of content (8 pages)

PAGE 1
QUICK START GUIDE US EN For a full explanation of all features and instructions, please refer to the User’s Guide. 1. Setting up your Wi-Fi® Video Baby Monitor MODELS: MBP843CONNECT MBP843CONNECT-2 MBP843CONNECT-3 MBP843CONNECT-4 A. Connect the Camera Unit to the power supply. Power adapter plug • • • Switch to turn ON the camera WARNING: Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (1m) away).
PAGE 2
US EN C. Fastening the battery cover of the Parent Unit. • • Place the battery compartment cover over the battery, making sure that the battery wires are carefully pushed down and the cover fits properly. Gently tighten the screw in a clockwise direction using a small cross head or flat end screwdriver. D. Connect the Parent Unit to the power supply. Micro USB Socket • • • Micro USB Plug Connect the small plug of the power adapter to the Parent Unit and the other end to the electrical outlet.
PAGE 3
US EN 2. Basic operation of the keys Parent Unit P Power ON/OFF button Press and hold to switch on/off the Unit. +- UP/DOWN buttons Press to tilt the camera up / down in normal mode. Press to move up / down in menu mode. <> LEFT/RIGHT buttons Press to pan the camera left / right in normal mode. Press to move left / right in menu mode. M MENU button Press to open menu options or exit from the menu. O OK button Press to confirm a selection.
PAGE 4
US EN 3. Setting up the Camera Unit for Wi-Fi® Internet Viewing A. Install the Hubble for Motorola Monitors App. 1. Scan the QR code and download the Hubble for Motorola Monitors App from the App Store for iOS® devices or from the Google PlayTM Store for AndroidTM devices. 2. Install the App on your device. B. View on Compatible Smartphones, Tablets and Computers. MBP843CONNECT 1. Run the Hubble app on your compatible smartphone or tablet. 2. Follow the in-app instructions to create your Hubble account.
PAGE 5
US EN 4. General Information If your product is not working properly, read this Quick Start Guide or the User’s Guide of one of the models listed on page 1. Contact Customer Service: US and Canada 1-888-331-3383 Email: support@motorolamonitors.com Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
PAGE 6
US EN THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
PAGE 7
US EN Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.
PAGE 8
US EN These terms and conditions constitute the complete warranty agreement between you and BINATONE regarding the Products or Accessories purchased by you, and supersede any prior agreement or representations, including representations made in any literature publications or promotional materials issued by BINATONE or representations made by any agent, employee or staff of BINATONE, that may have been made in connection with the said purchase.