User guide

Accessories 6 - 13
Setup
Figure 6-11 MSR Power Connection
Figure 6-12 MSR Serial/USB Connection
Battery Charging Indicators
To charge the mobile computer’s battery through the MSR, connect the power supply to the MSR (see Figure
6-11 on page 6-13), then attach the MSR to the mobile computer. The mobile computer begins charging
automatically.
The mobile computer’s amber charge LED, located in the Indicator LED Bar, shows the status of the battery
charging in the mobile computer. See Table 1-2 on page 1-7 for charging status indications.
The battery usually charges in less than four hours, if the mobile computer is not in use.
Vehicle Power
Supply
AC Power
Supply
Into Cigarette
Lighter
To Device
Serial/USB Port
Serial Port
NOTE Batteries must be charged within the 32° to 104° F (0° to +40° C) ambient temperature range.