User`s guide

29
Handset Settings
30
Handset Settings
Press the key as often as necessary until the HANDSET menu appears.
Press the key.
Press the or key to select the REGISTER submenu.
Press the key.
Press and hold the Page key on the base station until the acknowledgement signal
is heard, then enter the PIN when requested. (Default setting = 0000)
Press the key.
1.
2.
3.
4.
5.
6.
Note: After the connection has been established, the name and number of the handset
(the next available number if less than 4 are already registered) appear in the display
.
Further handsets can be registered on the base station. They must support the GAP
standard, however, it is possible that some of the handset functions will not be available.
Registering Additional Handsets
It is possible to display the duration of a call on the handset. The timer starts when
the conversation begins.
Activating/Deactivating Call Timer
Press the key as often as necessary until the HANDSET menu appears.
Press the key.
Press the or key to select the CALL TIMER submenu.
Press the key.
Use the or key to switch the call timer on or off.
Press the key to confirm the setting.
1.
2.
3.
4.
5.
6.
Press the key as often as necessary until the HANDSET menu appears.
Press the key.
Press the or key to select the DEFAULT.
Press the key.
Press the key to confirm.
Note: The handset is reset to its default settings.
The handsets can be reset to the default settings. In doing so, all the settings which
you have changed are returned to their default values. The phone book entries are
retained.
Default Settings
1.
2.
3.
4.
5.