User Guide DIGITAL CORDLESS PHONE Model ME7158/ME7058 Series Digital 1.
Welcome Congratulations on your purchase of a Motorola product! Your Motorola Telephone at a glance: ME7158 ME7058 1
Welcome 2 For product-related questions, please refer to the Warranty section. Please retain your original dated sales receipt for your records. For warranty service of your Motorola Product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Complies with the essential protective requirements and objectives of the EC's R&TTE Directive 1999/5/EC; EC Low Voltage Directive 72/23/EEC; EC EMC Directive 89/336/EEC Copyright © 2006 Motorola, Inc. All rights reserved.
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Important Safety Instructions . . . . . . . . . .5 Installation Guidelines . . . . . . . . . . . . . . . .6 Technical Amendments . . . . . . . . . . . . . . .7 Installation . . . . . . . . . . . . . . . . . . . . . . . . . .8 Package Contents . . . . . . . . . . . . . . . . . . . .8 Setting up the Base Station and Charger Unit . . . . . . . . . . . . . . . . . . . . . . . .8 Connecting the Base Station and Mains Adaptor . . . . . . . . . . . .
Contents Contents 4 Phone Book Menu . . . . . . . . . . . . . . . . . .23 Storing Entries . . . . . . . . . . . . . . . . . . . . .23 Storing Number in standby mode . . . . .25 Searching Number in Phone Book . . . . .25 Phone Book Groups . . . . . . . . . . . . . . . .26 Speed Dial Numbers . . . . . . . . . . . . . . . .27 Check Phone Book Capacity . . . . . . . . . .28 Emergency Call Numbers . . . . . . . . . . . .29 Area Code . . . . . . . . . . . . . . . . . . . . . . . . .29 Call Log Menu . . . . . .
Follow these safety precautions when using your cordless phone to reduce the risk of fire, electric shock and injury to persons or property: Reduce the risk of fire and shock by: 1. Keep all slits and openings of the phone unblocked. Do not set the phone on a heating register or over a radiator. Ensure that proper ventilation is provided at the installation site. 2. Do not use while wet or while standing in water. 3.
Important Safety Instructions 6 Unplug this cordless phone immediately from an outlet if : The power cord or plug is damaged or frayed. Liquid has been spilled into the product. The product has been exposed to rain or water. Do not retrieve the handset or base until after you have unplugged the power and phone from the wall. Then retrieve the unit by unplugged cords. The product has been dropped or the cabinet has been damaged. The product exhibits a distinct change in performance.
Technical Amendments These Operating Instructions are issued for information purposes. Their content is not subject of a contract. All indicated data is merely nominal values. The described equipment and options may differ depending on requirements which are specific to each country. Important Safety Instructions 8. Use only the power supply that came with this unit. Using other power supplied may damage the unit. 9.
Installation Package Contents Single Pack Twin Pack Quad Pack Base station 1 1 1 1 Handset 1 2 3 4 Mains Adaptor 1 2 3 4 Telephone Line Cord 1 1 1 1 Rechargeable Batteries 2 4 6 8 (type AAA rechargeable) Charger Unit 0 1 2 3 User's Guide 1 1 1 1 Please check the contents of the package carefully. If something is missing or has become damaged in transit, you should NOT use the telephone.
1. Thread the telephone cord and DC power cord through the gap at the bottom between the base and stand (as shown). 2. Insert the telephone line cord into the corresponding socket on the base station. 3. Thread the two cords through the slot at the bottom of the base. 4. Connect the mains power adaptor to the mains wall socket and switch the power on. 5. Connect the telephone line cord to the telephone socket. The base station is now ready for use.
Connecting the Charger Unit Plug the mains adaptor into the wall socket . The charger unit is now ready to use. Installation Preparing the Handset(s) 10 Inserting and Charging the Batteries Open the battery compartment, by pushing downwards on the cover. Insert the 2 x AAA (600 mAh / 1.2V) Ni-MH re-chargeable batteries supplied, observing the correct polarity. _ + CAUTION : PLEASE DO NOT USE ALKALINE OR _+ NON-RECHARGEABLE BATTERIES. IT MAY CAUSE PERMANENT DAMAGE TO THE UNIT.
LOW BATTERY WARNING If the handset batteries are low and need charging you will hear a beep every 30 seconds and the icon will be displayed. Note: A headset is not included as standard. You can connect a headset to your handset. Lift the small rubber flap on the right side of the handset to reveal the headset socket. Connect the jack plug into the jack socket.
Features Telephone Features 12 Congratulations on your purchase of this high quality, cordless telephone set.
Control Buttons Right Soft Key Press from standby to access the Phone Book. Press to go back to the previous menu. Press to delete an incorrect character/digit. Up Key Vol.+ Use to scroll up through the menu/display options. Shortcut key to access Missed Calls Log. Adjust the handset volume Down Key Use to scroll down through the menu/display items. Shortcut key to access Received Calls Log. Adjust the handset volume External Call Key Use to make an external call.
Display Icons Display Icons Signal icon Flashes if the handset moves out of communication range with the base. Key lock icon Keypad lock is active. Line in use icon Indicates that the line is in use. Alarm icon Alarm is set. Ring icon External ring volume is set to on. Battery icon Shows the battery charge level. No ring icon External ring volume is set to off. No Line icon Base not connected with PSTN. Mic mute icon Microphone is muted. Message waiting icon Indicates that there is message waiting.
Phone book 1. Search 2. Add 3. Group 4. Speed Dial 5. Check 6. Emergency Call 7. Area Code Call log 1. Missed call 2. Received call 3. Dialled call 4. Delete Timer 1. Clock 2. Alarm Handset settings 1. Ring Type 2. Ring Volume 3. Ring On/Off 4. Pre Fix 5. Outgoing Call Bar 6. Message Waiting 7. Wallpaper 8. Language 9. Contrast 10. Key Tone 11. Auto Answer 12. Handset name 13. LCD Mode 14. Default Base settings 1. Base Ring Tone 2. Base Ring On/Off 3. Priority Call Alert 4. Dial Mode 5. Register 6.
Using the Telephone Note: If the handset is in the base station or charger unit, only the key will function. Lift the handset out of the base station/charger unit for use. key and Using the Telephone Switching the handset On/Off 16 When the handset is put in the base station/charger unit it switches on automatically and charges up. Allow the batteries to charge for 16 hours without interruption before first use. To switch the handset off: 1. In ON mode, press and hold the key for 2 seconds.
4. To end the call, press the key. Hands-free Mode There are two methods with which to have telephone conversations in hands-free mode ,namely using direct dialing or by switching over during the call. Direct dialing 1. Dial the call number and press the 2. Carry out the conversation. 3. Press the key to end the call. key to start dialing. Using the Telephone Direct dialling 1. Press the key and wait for the dialling tone. 2. Dial the telephone number and complete the call.
Using the Telephone Switching During a Call 1. Dial the call number and press the key to start dialing. 2. Carry out the conversation. 3. Press the key to switch hand-free mode on or off. 4. Press or key to adjust the handset volume. 5. Press the key to end the call. Taking calls When an external call is received, all registered handsets ring and the LCD backlight will be on during ringing. The display shows Incoming call. The In-use / CID LED incoming call light on the base flashes.
See page 37 for details on how to store a prefix number. Note: To store a number in the Phone Book, see "Storing entries" on page 23. In standby mode: 1. Press the key to enter the phone book. Note: If the phonebook is empty, No Records will be displayed for 2 seconds. 2. The first entry in the phone book is displayed. Press the or key to display the entry you want. 3. Press the key to dial the number.
Using the Telephone Making Internal Calls With more than one handset registered to the same base as you, you can make internal calls between handsets. To call another internal handset: 1. Press the key. 20 2. Press the or key to display the handset you want to call and press to select. The called handset will ring and show the caller's handset number. When the other handset answers hold your conversation. 3. Press the key to end the call.
Paging Handsets If you cannot locate a handset you can use the page key on the base to help find it. 1. Press the Page key on the base. All handsets registered to the base will ring and the display on each handset will show Paging. 2. To stop the paging ring, press the Page key on the base again, or press any key on the handset. Note: All paged handsets will stop ringing if any key on the handset or page key on the base is pressed.
Changing the Handset Volume Using the Telephone You can adjust the handset volume during a call (external or internal), the volume level is displayed. There are 5 different volume levels. During a call: 1. Press the or key to adjust the handset volume. 22 Key Lock You can use the key lock to prevent accidental button presses activating the handset. When the key lock is on, the icon is displayed. You will still be able to make calls to the emergency numbers when the key lock is on.
USING THE MENU PHONE BOOK MENU The phone book stores up to 80 contact names - for eac h contact name you can store 3 different contact numbers, for example: home, office and mobile numbers. Once you have stored your names and numbers, you can sort your contacts into caller groups and assign each caller group a different ringtone.
Using the Menu 24 Entering Names and Numbers To enter characters, press the relevant key the corresponding number of times according to the position on the key. For example, to enter an L, press the 5 key three times or to enter a B press the 2 key twice. Delete incorrect digits by pressing the key. Press the * key to switch between lower/upper case and number only entry.
Storing a number from standby mode: Enter the telephone number you want to store and press to save the number. Select a location to store the number (e.g. Number 1) and press the key to confirm. Enter the name and press the key. Press or to select the caller group where you want to store the name/number and press the key to confirm. Save OK is displayed and then return to standby mode. 5. Press the key to return to standby mode.
Phone Book Groups Using the Menu Your phone book names and contact numbers are stored in smaller, more manageable caller groups. There are six pre-set groups - VIP, Business, Family, Friends, School and Others. To display the contacts stored in a particular group: In the phone book menu: 1. Press the or key until Group is displayed and press the key to select. 2. Press the key to display the name of the group you want and press . 3. Press the or key to display either View or Edit name.
Your Motorola telephone has 9 speed dial keys (keys 1- 9).You can select any of the numbers stored in the phonebook and save them on a speed dial key. Once stored, from standby mode you can press and hold the speed dial key you want and the number will be dialled out automatically. Speed dial numbers can be up to 24 digits. Store a Speed Dial Number In the phone book menu: 1. Press the or key until Speed dial is displayed and press the key to select.
Using the Menu Delete a Speed Dial Number In the phone book menu: 1. Press the or key until Speed dial is displayed and press the 28 key to select. 2. Press the or key to display the speed dial key you want and press the to confirm. 3. Press the key to select Delete then press the key. Deleted is displayed. 4. Press the key to confirm. Delete OK is displayed. 5. Press the key to return to standby mode.
You can store 4 emergency call numbers which can be dialled out at any time even when call restrictions are set (for example, if the keypad is locked or call barring is set). Each emergency number can have a maximum of 5 digits. Example: If you set 123 as an emergency number - only the number 123 can be dialled out with call restrictions set. If you dial any of the emergency numbers manually (instead of using the phone book) and the keypad lock is on or call barring is set, they will still be dialled out.
Using the Menu The area code can be a maximum of 5 digits. In the phone book menu: 1. Press the or key until Area code is displayed and press the key to select. 2. Press the key again, then enter an area code (up to 5 digits) and press the key to confirm. Save OK is displayed. 3. Press the key to return to standby mode. 30 Call Log Menu There are three types of call log: Missed Call, Received Call, and Dialled Call. Each log can contain up to 20 records.
Viewing the call logs using the menu: In the calls log menu: 1. Press the or key to display the call log you want and press the key to scroll and view all call log entries. 3. With a call highlighted, press the key to view the call details. For each call, the caller's number and date and time of the call are displayed. If the caller's number is stored in the phone book and an exact name/number match is found, the caller's name will also be displayed. 4.
Using the Menu 32 4. Press the key to return to the calls log and view the other calls. 5. Press the key to return to standby mode. Viewing the missed call log from standby mode: When there are calls in the Missed calls log, the standby display shows, for example, 2 Missed Calls. 1. Press the key to view the details of the most recent missed call. The caller's number (and name if an exact name/number match is found in the phone book) and date and time of the call are displayed. 2.
Deleting a call log number Delete all Calls Log Entries In the calls log menu: 1. Press the or key to display Delete all and press the key . 2. Press the or key to highlight the calls log you want to delete or highlight Delete all to delete the entries from all 3 call logs and press the key to confirm. Deleting is displayed briefly, then Empty! 3. Press the key to return to standby mode. TIMER MENU The timer menu lets you set the handset clock and set an alarm. .
Using the Menu 2. Enter the date using 2 digits for the day, 2 for the month and 4 for the year and press the key to confirm. Example, for 17th July 2006 : enter 1, 7, 0, 7, 2, 0, 0, 6. 3. Enter the time using 2 digits for the hour and 2 for the minute and press the key to confirm. Example, for 2:45pm: enter 1, 4, 4, 5. Set OK is displayed. 4. Press the key to return to standby mode.
10. Press the key to increase or the key to decrease the volume and press the key to select. Set OK is displayed briefly. 11. Press the key to return to standby mode. Silence the Alarm When it Sounds When the alarm time is up, the alarm will sound for 30 seconds. To silence the ring: 1. Press any key on the handset. HANDSET SETTINGS MENU Using the Menu 5. Press the key once to go back to the previous menu and set the ringer melody. 6. Press the key to display Ring Type and press the key to confirm. 7.
In the handset settings menu: 1. Press the or key to display Ring type and press the 2. Press the confirm. or key to confirm. key to display the Ring type you want and press the key to Using the Menu 3. Press the or key to scroll and hear the ringer melodies, with the one you want highlighted, press the key to select. Set OK is displayed. 4. Press the key to return to standby mode. Changing the Ringer Volume For each of the different ring types you can set your preferred ringer volume level.
If the external ringer is set to off, the icon is displayed. In the handset settings menu: 1. Press the or key to display Ring on/off and press the or key to confirm. key to display either: External on/off for the external ringer Or Internal on/off for the internal ringer Press the key to confirm. 3. Press the or key to display (for example) either Internal on or Internal off and press the key to confirm. Set OK is displayed. 4. Press the key to return to standby mode.
Using the Menu 38 2. Press the key to display Pre fix edit and press the key. 3. Enter a prefix number (max. 5 digits) and press the key to confirm. Set OK is displayed. To edit an existing prefix number: Delete existing digits using the key and enter a new prefix number and press to confirm. 4. Press the key to return to standby mode. Call Barring You can select from various call barring options: Off - no calls are barred, all calls are allowed.
If you do not enter a number for Pre Call barring, All external calls will be barred as no number will match a 'blank'. 4. Press the key to return to standby mode. If you have subscribed to a voice messaging service, the In-use / CID LED message light on the base will flash to alert you if you have a message waiting. To hear your messages, contact your voice messaging service provider. Note: For quick dialling you can store the voice messaging service number on your phone.
To clear messages Using the Menu When you have listened to your messages, to turn off the flashing message light: In the handset settings menu: 1. Press the or key to display Message waiting and press the key to select. 2. Press the key to display Clear message and press the key to confirm. 3. Press the key to return to standby mode. Changing the Display Wallpaper Your telephone has a choice of 3 wallpapers that will be shown on the handset display when in standby mode.
In the handset settings menu: 1. Press the or key to display Language and press the 2. Press the 3. Press the or key to select. key to display the language you want and press the key to confirm. key to return to standby mode.The display will show the selected language. There are 5 different contrast levels for the handset display. In the handset settings menu: 1. Press the or key to display Contrast and press the key to select. 2.
Switching Auto Answer On/Off The automatic call answering function (auto answer on) enables an incoming call to be taken immediately when the handset is lifted from the base station (or charger unit). It is not necessary to press the or key. Using the Menu When auto answer is off, you will need to press the In the handset settings menu: 1. Press the or 2. Press the or and press the 3. Press the key or the key to display Auto answer and press the key to take a call. key to select.
The display backlight comes on whenever a key is pressed or an incoming call is received. You can determine how long the backlight stays on after the last button press: In 'Power Save Mode' the backlight will remain on for 15 seconds. In 'Extended Mode' the backlight will remain on for 30 seconds. In the handset settings menu: 1. Press the or key to display LCD mode and press the key to select. 2. Press the or key to display the mode you want and press the key to confirm. Set OK is displayed. 3.
Using the Menu Handset Default Settings 44 External Ringer Melody Canon Prefix On/Off OFF Internal Ringer Melody Espresso Prefix Number Empty VIP Ringer Melody High_Tide Number of Message Service Empty Business Ringer Melody Higher_Plane Wallpaper Wallpaper 2 Family Ringer Melody Jubilation Language English Friends Ringer Melody Maple_Leaf LCD Contrast Level 3 School Ringer Melody Vivaldi Key Tone ON Others Ringer Melody Nightlife Auto Answer ON Paging Ringer Melody One_Mo
BASE SETTINGS MENU The base settings menu lets you personalise the settings on your base station. Changing the Ringer Melody key to select. 2. Press the or key to select the melody you want and press the confirm. Set OK is displayed. 3. Press the key to key to return to standby mode. Switching the Base Ringer On/Off In the base settings menu: 1. Press the or key to display Base ring tone and press the to select. 2. Press the or key to select either On or Off and press the Set OK is displayed. 3.
Using the Menu If you want all handsets to ring and no handset to have priority, select All. In the base settings menu: 1. Press the or key to display Priority call aler t and press the key to select. 2. Press the or key to select the handset you want to ring first and press the key to confirm. 3. Press the or key to select the number of times the handset will ring before the other handsets start to ring (for example, for 4 times, select Ringtones 4) and press the key to confirm. Set OK is displayed. 4.
Registering Additional Handsets Your handset can be registered for use with up to 4 different base stations. A maximum of 6 handsets can be registered to use with your base station. Note: Any additional handsets must be GAP compatible. Even if a handset meets GAP standards, it is still possible some handset functions will not be available. At the base: 1. Press and hold the Page key. The base will beep twice and the orange light will flash for one minute. On the handset, in the base settings menu: 1.
Using the Menu De-register a Handset 48 You can use one handset to de-register another handset registered to the same base. In the base settings menu: 1. Press the or key to display De-register and press the key to confirm. 2. Enter the handset PIN code (pre-set code 0000) and press the key to confirm. 3. Press the or key to highlight the number of the handset you want to de-register and press the key to confirm. Confirm? is displayed. 4. Press the key to select. De-register OK is displayed. 5.
For increased security you may want to change the PIN code to prevent any unauthorised changes being made to the settings on your telephone. Always keep a note of the new PIN code. In the base settings menu: 1. Press the or key to display System PIN and press the key to select. 2. Enter the current PIN (pre-set code 0000) and press the key to confirm. 3. Enter a new 4-digit PIN code and press the key. 4. Re-enter the new PIN code and press the key to confirm. Set OK is displayed. 5.
Resetting your Base to the Default (Pre-Set) Settings Using the Menu In the base settings menu: 1. Press the or key to display Default and press the key to select. 2. Confirm? is displayed, press the key to confirm. Set successfully is displayed. Note: Press the key to cancel. 3. Press the key to return to standby mode.
Walkie Talkie mode To use the handsets as walkie talkies In the function menu: 1. Press the or key to display Walkie talkie and press the key to select. key to select. 2. Press the or key to highlight Enable and press the 3. Enter the Group ID code (e.g. 1234, any number with four digits) and press the key to confirm. Note: The Group ID of different handsets must be the same in order to communicate. 4. Enter the WT ID code (from 1 to 9) and press the key to confirm.
Using the Menu 6. To accept a call - press the or key. You can now communicate using the handsets as walkie talkies. Or To reject a call - press the key. 7. To exit walkie talkie mode, select Disable from the Walkie talkie menu. To exit walkie talkie mode and return the handset to normal mode In the function menu: 1. Press the or key to display Walkie talkie and press the key to select. 2. Press the or key to highlight Disable and press the key to select. Exited will be displayed. 3.
Quick Reference Press and hold or Making external calls Handsfree calls (Make call) enter number, or Receiving calls Ending calls , / Access Call waiting line or / (during call) / (auto answer on) Lift handset from base/charger / Place handset in base/charger Dial Phone book entry Hold, Transfer call (PABX) , enter number /enter number / to Phone book, to entry, , / to Search, , /Extension number / EXT Call / / / again to get to first line Making internal calls , display handset numbe
PHONEBOOK Store entries In Phonebook menu: , / to Add , to Set group, / , enter name, to select group, , enter number, , to exit OR Quick Reference From standby: enter number , enter name, , / to select location, to select group, , to exit Search for entry In Phonebook menu: Search displayed, , enter 1st letter , , / to entry, , to view details, to exit View Group Contacts In Phonebook menu: / to Groups , display group, / to View , Edit Group Contacts Store Speed Dial , / to
CALLS LOG In Calls log menu: of a call, View Missed Calls log / to scroll calls, back to log, Using shortcut key from standby: to view details of a call, View Received Calls log Save to Phone book With call displayed: to view details of a call, Delete entire Calls log , / , In Calls log menu: to scroll calls, , to exit / to scroll calls, , to Delete, / to to exit to Delete, highlight call log or Delete All, to exit to confirm, , enter name, / to exit back to log, , Save, With c
Set Alarm In Timer menu: / / to select frequency, Ring type , , , Volume, Quick Reference Silence Alarm to Alarm, / / , ,enter time, , , to to select melody, , , to Ring to select volume, , Off to exit Press any key HANDSET SETTINGS Change ringer melody In Handset settings menu: select ring type, Change ring volume , Switch external ringer on/off / / In Handset settings menu: to select ring type, to Ring type, , to select melody, , / / to required volume, In Handset settin
In Handset settings menu: Pre fix edit , Call Barring to Pre fix, / , enter prefix number, In Handset settings menu: enter 4 digit PIN, , Service Number In Handset settings menu: / Clear Messages Change display wallpaper In Handset settings menu: Set Key tones on/off , to exit to Wallpaper, / , / to exit / , In Handset settings menu: , , , In Handset settings menu: to set level, to dial to Message waiting , / to Clear message, to select language, Setdisplay contrast , , to e
Auto Answer on/off In Handset settings menu: to Auto answer, / to Auto answer on or Auto answer off, Handset name In Handset settings menu: name Quick Reference LCD Mode , to exit to Handset name, enter a / to LCD mode, , to Extended mode or Power save mode, , to exit In Handset settings menu: displayed, / to Default, Confirm? to confirm, to exit BASE SETTINGS Change ringer melody In Base settings menu: / Base ringer On/Off Priority call alert to Base ring tone, , / to Base ring o
At base: Press and hold Page until 2 beeps sound.
FUNCTION Set Walkie Talkie mode In Function menu: to Enable, / to Walkie talkie, , enter Group ID, In walkie talkie mode: Press , / , enter WT ID, - then WTID code or ,* Quick Reference to call 60 Return to normal mode In Function menu: Disable, , SETTING THE CLOCK IN BASE STATION Set hour Press the HOUR button Set min Press the MIN button / to Walkie talkie , to exit , / to
WARRANTY INFORMATION MOTOROLA DOES NOT WARRANT ITS CORDLESS TELEPHONE PRODUCTS ("PRODUCT(S)") TO YOU, THE END-USER. A LIMITED WARRANTY FOR THIS PRODUCT IS PROVIDED TO YOU BY MOTOROLA'S DISTRIBUTOR ("DISTRIBUTOR") PURSUAN T TO DOCUMENTATION INCLUDED WITH THIS PRODUCT. PLEASE CONTACT THE DISTRIBUTOR IF YOU EXPERIENCE PROBLEMS WITH THIS PRODUCT.
Warranty WARRANTY INFORMATION cordless telephone and accessories which you have purchased from an authorised reseller (the "Products"), to be in conformance with the applicable specifications current at the time of manufacture for a term of 12 months from date of purchase of the Product(s) (Warranty Term).
You must ensure that all and any repairs or servicing is handled at all times by a Distributor's Service Centre in accordance with the Distributor's Service requirements. In some cases, you may be requested to provide additional information concerning the maintenance of the Products by Distributor's Service Centres only, therefore it is important to keep a record of any previous repairs, and make them available if questions arise concerning maintenance.
When the Product is used in conjunction with ancillary or peripheral equipment not supplied for this digital cordless telephone by Distributor, Distributor does not warrant the operation of the Product/peripheral combination and Distributor will not honour any warranty claim where the Product is used in such a combination and it is determined by Distributor that there is no fault with the Product.
Warranty All plastic surfaces and all other externally exposed parts that are scratched or damaged due to customer normal use. Products rented on a temporary basis. Periodic maintenance and repair or replacement of parts due to normal wear and tear. Note: The talk-time, stand-by time and total life cycle of the rechargeable batteries for your digital cordless telephone will depend on usage conditions and network configurations.
Please make and retain a note of all data you have inserted into your Product for example names and phone numbers, before submitting your Product for a Warranty service as such data may be deleted or erased as part of the repair or service process.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2006.
