Two User Manual

Troubleshooting
30
Troubleshooting
Symptom Try This:
No Power
Recharge or replace Li-Ion battery.
Reposition or replace Alkaline batteries.
Message not
transmitted
Make sure Push to Talk is completely pressed while
transmitting.
Recharge, replace, and/or reposition batteries.
Verify the transmit light is illuminated while speaking.
Verify Channel, Frequency, and Code settings are correct.
Hearing other
noises or
conversation on
a channel
Frequency may be in use. Change on all radios if possible (see
page 23 and 24).
Poor audio
quality
Bandwidth does not match. For optimal audio quality when
communicating with VL50 radios, the bandwidth of other radios
should be set to 12.5 kHz, if possible.
VL50operation.fm Page 30 Tuesday, February 24, 2004 4:46 PM