Two User Manual

Spirit GT Series Programming

The VL50 radio platform is designed to replace the Spirit GT Series radio. The first eight

frequencies and 38 interference eliminator codes of VL50 radio are compatible with Spirit GT

Series. To program your VL50 radio to talk with a Spirit GT Series, verify or change your Spirit

GT settings as follows.

To verify the frequency and code:

1. Press the Menu button 3 times. The channel number and frequency display.

2. Press Menu again. The interference eliminator code displays.

To change the frequency:

1. Enter programming mode by pressing and holding

Push to Talk

for approximately

5 seconds while turning the radio on, then release

Push to Talk

2. Use the Scroll button to select one the eight frequencies.

To change the interference eliminator code:

1. Enter programming mode by pressing and holding

Push to Talk

for approximately

5 seconds while turning the radio on, then release

Push to Talk

2. Press the Menu button. The code number flashes.

3. Use the Scroll button to select the code.

To exit programming mode on a Spirit GT Series radio, press

Push to Talk

or the radio will

exit programming mode after five seconds.

VL50operation.fm Page 40 Tuesday, February 24, 2004 4:46 PM