Two User Manual

VL50 Radio Programming Quick Reference
To enter programming mode, press and hold Push to Talk
and
Qfor 3 seconds while turning the radio on. The radio
beeps and displays
k, the channel number flashes, and the
frequency (indicated by
l) and code (indicated by y)
display alternately.
Set the
Channel
Press [ or ] .
Set the
Frequency
Press
S until l displays.
Press
[ or ] to change the
frequency.
Set the
Interference
Eliminator
Code
Press
S until y
displays.Press
[ or ] to change
the code.
Set
Available
Channels
Press
S until = displays.
Press
[ or ] to select
number of available channels.
VL50qr.fm Page 49 Tuesday, February 24, 2004 4:47 PM