Technical data

Index
IN-4 Computer Group Literature Center Web Site
I
N
D
E
X
MVME172 continued
features 4-1
installation 1-18
regulatory compliance A-4
MVME172Bug documentation E-1
MVME328 SCSI Controller D-1
MVME374 network controller C-1
MVME376 network controller C-1
N
network boot process 2-10
network controller modules C-1
non-volatile RAM (NVRAM) 3-9, 3-11
no-VMEbus-interface option 4-6
O
operating parameters 3-9
operating temperature A-1
option fields, in firmware command 3-6
P
P1 and P2 connectors 5-9
parameters, ENV command 3-11
parity DRAM 1-16
pin assignments, connector 5-1
port number(s) 3-5
power requirements A-1
powering up the board 2-1
preparing the board 1-1
processor location monitors 1-20
programmable tick timers 4-13
R
regulatory compliance A-4
regulatory guidelines A-4
related specifications E-3
relative humidity A-1
remote control/status connector 5-2
remote panel connector 4-15
reset code source 1-13
resetting the system 2-1, 2-11
restarting the system 2-11
RF emissions 1-18, A-4
ROMboot process 2-9
S
safety procedures 1-4
SCSI
controller (53C710) 4-12
interface 4-12
signals 5-9
termination 4-13
terminator configuration 1-8, 4-13
SD command 2-13
serial
communication controllers (SCCs) 2-7
communication interface 1-21, 4-11, 5-4
communication parameters 2-4
serial connections
DB25-DCE-to-RJ45 1-22
DB25-DTE-to-RJ45 1-22
serial ports 2-6
Set Bug/Operating System Environment
(ENV) firmware command 3-11
setting date and time 2-7, B-2
shielded cables A-4
size of base board A-1
slave address decoders, VMEbus 3-16
snoop control 1-11
software-programmable hardware interrupts
4-14
software-readable jumpers (J21) 1-14
specifications
MVME172 A-1
related E-3
SRAM (static RAM)
backup power source select header (J14)
1-9
battery options 4-8
options 4-7
stacking mezzanine boards 1-16
startup overview 1-1
static variable space 3-4
storage temperature A-1