Technical data

Standard Commands

http://www.motorola.com/computer/literature 3-27

PPCBug Diagnostics Manual, listed in Appendix C, Related

Documentation for complete descriptions of the diagnostic routines and

instructions on how to invoke them.

Notes 1. You may enter command names in either uppercase or

lowercase.

2. Some diagnostics depend on restart defaults that are set up only

in a particular restart mode. Refer to the documentation on a

particular diagnostic for the correct mode.

3. Test Sets marked with an asterisk (*) are not available on the

MVME5100 (unless an IPMC712 or IPMC761 is mounted). The

ISABRDGE test is only performed if an IPMC761 is mounted on

the MVME5100. If the MVME5100 is operating in PMC mode

(IPMC761 is not mounted), then the test suite is bypassed.

Table 3-2. Diagnostic Test Groups

Test Group Description

EPIC EPIC Timers Test

PHB PCI Bridge Revision Test

RAM RAM Tests (various)

HOSTDMA DMA Transfer Test

RTC MK48Txx Real Time Clock Tests

UART Serial Input/Output Tests (Register, IRQ, Baud, & Loopback)

Z8536 Z8536 Counter/Timer Tests*

SCC Serial Communications Controller (Z85C230) Tests*

PAR8730x Parallel Interface (PC8730x) Test*

KBD8730x PC8730x Keyboard/Mouse Tests*

ISABRDGE PCI/ISA Bridge Tests (Register Access & IRQ)

VME3 VME3 Tests (Register Read & Register Walking Bit)

DEC DEC21x43 Ethernet Controller Tests

CL1283 Parallel Interface (CL1283) Tests*