Wireless Switch VIEW Certified Configuration Guide

Motorola: RFS6000 Wireless Switch with AP300
PN: 1725-36197-001_A.doc
3
Introduction
Polycom’s Voice Interoperability for Enterprise Wireless (VIEW)
Certification Program is designed to ensure interoperability and high
performance between SpectraLink 8020/8030 Wireless Telephones
and WLAN infrastructure products.
The products listed below have been thoroughly tested in Polycom’s
lab using the VIEW Certification Test Plan. This document details
how to configure the RFS6000 Wireless Switch and the AP300 access
point (AP) to best support SpectraLink 8020/8030 Wireless
Telephones.
Certified Product Summary
Manufacturer: Motorola
Approved products: RFS6000 Wireless Switch with AP300
†
RF technology: 802.11a/b/g
Radio: 2.4 GHz (802.11b/g), 5 GHz (802.11a)
Security: WPA-PSK, WPA2-PSK
AP and WLC software version certified: 3.3.1.0-003R
SpectraLink handset models certified: ** e340/h340/i640 8020/8030
†
SpectraLink handset software certified: 89.135 or greater 122.021 or greater
SpectraLink radio mode: 802.11b 802.11b 802.11a
Maximum telephone calls tested per AP: 12 12 12*
Network topology: Switched Ethernet (recommended)
†
Denotes products directly used in VIEW Certification testing.
* Maximum calls tested during VIEW Certification. The certified product may actually support a higher
number of maximum calls for 802.11a and 802.11g radio modes.
** SpectraLink handset models 8020/8030, e340/h340/i640 and their OEM derivates are VIEW Certified
with the WLAN hardware and software identified in the table. Throughout the remainder of this
document they will be referred to collectively as “SpectraLink Wireless Telephones”.
Service Information
If you encounter difficulties or have questions regarding the
configuration process, please contact Motorola technical support at
[phone], or at
http://www.symbol.com/services/contactsupport
.