Wireless Switch VIEW Certified Configuration Guide

Configuration Guide

PN: 1725-36197-001_A.doc

Installing the AP license through the CLI

For the RFS6000 to adopt AP300s, a license has to be installed. Obtain

the license key and then install based on the following steps:

RFS6000>en

RFS6000#conf t

RFS6000(config)#license AP <LICENSE_KEY>

Installing the AP license through the Web interface

1. Open the RFS6000 applet by entering the IP address of the

wireless switch: http://192.168.2.103

2. In the navigation pane under

Switch, click Licenses.

3. Enter the

License Key and Feature Name as seen in the figure below.

4. Click the

Install button to install the license.