User Guide

X
Home Print Exit
Introduction Before You Begin Installation Configuration Troubleshooting Legal
26
Configuring for TCP/IP in Windows 2000
The following basic instructions are for Windows 2000 users. Windows 95, 98, and Me
instructions begin on page 23. If you are using a different operating system, refer to your
user guide.
1 On the Windows Desktop, click Start.
2 Select Settings and then Control Panel from the pop-up menus.
3 Double-click the Network and Dial-up Connections icon on the Control Panel
window.
4 On the Network and Dial-up Connections window, click
Local Area Connection #. The value of this number (#) varies from system to
system, but usually is 2. The Local Area Connection # Status window is displayed
as shown at the top of the next page.