User`s guide

modem and the communication software.

2. Press the ENTER key several times. The remote system may be waiting

to receive your data before it begins.

3.Make sure the correct terminal emulation mode is being used in the

software (refer to software manual).

4.4 Modem experiences errors while online with a remote

modem.

1. Make sure Call Waiting is turned off.

2.Make sure RTS/CTS hardware flow control is enabled.

Do not use XON/XOFF software flow control when

transferring binary

3. Make sure the data speed is not faster than your computer's capability.

Operating at higher speeds under Windows 95 requires a faster CPU

(Pentium 200MHz or better).

4.5 Modem exhibits poor voice record or playback.

1. Make sure the correct modem type is selected in the Voice/Fax software.

Use "Motorola" or similar selection. Do not select "Cirrus Logic" or

"Lucent".

2.Make sure your computer is fast enough to handle voice operations

(38.4Kbps). Voice operations are CPU intensive and require a Pentium

200MHz MMX or better CPU when running under MS Windows 95.