User`s guide

28
Command Option Function
%L41 41333 BPS
%L42 42666 BPS
%L43 60.0 KBPS
%L44 46666 BPS
%L45 49333 BPS
%L46 50666 BPS
%L47 53333 BPS
%L48 54666 BPS
\K Break Handling Method
\K1 Destructive Expedited
\K3 Non-destructive Expedited
\K5 Non-destructive Non-expedited
\N Error-Correction Mode
\N0 Normal
\N1 Direct
\N4 LAP-M Only
\N6 Reliable
\N7 Auto-Reliable
\Q DTE Flow control
\Q0 Disable
\Q1 XON/XOFF (software flow control)
\Q3 RTS CTS (hardware flow control)
\T Disconnect on DTE Inactivity
\T0 Disable
\T n Disconnect after n minutes of inactivity by the
computer; n =0 to 255
\V Connect Message Format
Determines which message the modem
generates at connection time
/V0 Display DTE Rate
/V1 DTE with EC/DC Message
/V2 Display DCE Rate
/V3 DCE with EC/DC Message
/V4 DCE with Modulation & EC/DC Message
5.7 AT* (Asterisk) Commands
The modem responds to the following AT” command options.
The letters AT (or at) must precede all commands expect A/ and +++.
Command Option Function
*DD Dial wait
Specifies the time interval to wait when the
modem encounters a W or w while processing
a dial string
*DD0 2 Seconds
*DD1 3 Seconds