User's Guide

Quick Start Guide / Guia de Início Rápido /
Guía de inicio rápido/ Guide de démarrage rapide
1. Pairing
3 Sec
•
•
Hold > for 3 seconds.
Select “MOTO SP106" from the
phone Bluetooth menu.
2. Fitting
To optimal the best fitting
and audio experience, it is
recommended to try each
of the different earbud
sizes.
3. Button Operation
X1
X1
X2
1
S
MFB
1S
S
iri/Google Assistant
Additional Operation
Call
Reject a call Long Press - / +
Receive incoming call and
end ongoing call
Triple press MFB
Receive incoming and on
hold ongoing call
Press MFB
LED Indicator
Pairing Red-blue flash
Standby Blue flash
Charging Red steady
Fully charged Blue steady
Battery low Red flash
MOTO SP106
FCC ID: 2ARRB-SP106 IC: 20353-SP106
Frequency Band: 2.402 – 2.480GHz
Working temperature: 0°C–45°C
3
S
X1
LED
EN
4. Charging
Fully charge before use.
T
he device can be powered through a micro
USB from any CE compliant power source that
implement the European interface as requested
by EN 301 489-52.
Safety instructions
DANGER
To avoid hearing damage, limit the time you use
earbuds at high volume and set the volume to a
safe level. The louder the volume, the shorter the
safe listening time is.
WARNING
This true wireless earbuds are compliant with all relevant
standards regarding electromagnetic fields and is, when
handled as described in the User Guide, safe to use.
Therefore, always read the instructions in this User Guide
carefully before using the device.
•
Listen at reasonable volumes for reasonable periods of
time.
•
Be careful not to adjust the volume continuously upwards
as your hearing adapts.
•
Do not turn up the volume so high that you can't hear
what is around you.
•
You should use caution or temporarily discontinue use in
potentially hazardous situations.
•
Excessive sound pressure from earbuds can cause
hearing loss.
•
Using earbuds with both ears covered while driving is
not recommended and may be illegal in some areas
while driving.
•
For your safety, avoid distractions from music or phone
calls while in traffic or other potentially dangerous
environments.
•
Replacement with incorrect type batteries may cause
explosion. Make sure to use original batteries.
•
Do not replacement of a battery with an incorrect type that
can defeat a safeguard (for example, in the case of some
lithium battery types).
•
Do not disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery, that can
result in an explosion.
•
Do not leaving a battery in an extremely high temperature
surrounding environment that can result in an explosion or
the leakage of flammable liquid or gas.
•
The battery subjected to extremely low air pressure that
may result in an explosion or the leakage of flammable
liquid or gas. Do not shock the battery at a high attitude.