Cable Modem User Guide SB5100

Setting Up a USB Driver in Windows 98 Second Edition, continued
Introduction Before You Begin Installation & Configuration FAQ
Troubleshooting
Glossary
License
SB5100 Series Cable Modem User Guide 13
4 Be sure “CD-ROM drive” is the only box checked.
5 Click Next.
The message “Please wait while Windows searches for a new driver for this device”
is displayed.
6 If your computer successfully locates the driver, skip to step 8.
If your computer does not locate the driver, the previous window is displayed again.
Select Specify a location and type the location of your CD-ROM drive.
To load the driver successfully, you may need to click Browse to manually select the
driver file from the CD-ROM. For the SB5100 or SB5101, select the NetMotCM.sys
file.
Or
For the SB5120, select the SB5120.inf file.
7 Click Next.