Cable Modem User Guide SB5100

Configuring TCP/IP in Windows XP, continued
Introduction Before You Begin Installation & Configuration FAQ
Troubleshooting
Glossary
License
SB5100 Series Cable Modem User Guide 35
10 On the Internet Protocol (TCP/IP) Properties window, verify that the settings are
correct, as shown at left.
11 Click OK to close the TCP/IP Properties window.
12 Click OK to close the Local Area Connection Properties window.
When you complete the TCP/IP configuration, go to “Verifying the IP Address in Windows
2000 or Windows XP” on page 38.