Wireless Voice Gateway Quick Installation Guide

QUICK INSTALLATION GUIDE 17
C. USB Connection
You can connect a single PC running Windows 2000, Windows
XP, or Windows Vista to the SVG2500 USB port. The USB
connection requires special driver software supplied on the
SVG2500 Installation CD-ROM.
1. Insert the SVG2500 Installation CD-ROM into the CD-ROM
drive. Be sure the SVG2500 is not connected to your PC.
2. Install the USB driver software and restart your PC.
3. Connect the USB cable to the USB connector on the
SVG2500 and connect its other end to the USB connector
on the PC. Continue with Section E to secure your Internet
connection.