User Manual

If you choose step 1B, it is time to tighten the bolts that hold the column to the under dash bracket and fire-
wall. Returning to the radiator, re-attach it and the shroud to the grill in the holes that you drilled. Check the
clutch pedal for proper operation. If you feel any binding or roughness, perform the steps outlined in step 3.
If you have a automatic transmission, re-tighten the adjustment pinch bolt on shift rod. The shift linkage for
the Quadra-Trac may need to be modified if it doesn’t hook up.
IF YOU PURCHASED A BODY LIFT SYSTEM THAT INCLUDED REPLACEMENT POLYURETRANE
BODY MOUNTS, THE FOLLOWING CHART INDICATES THE PROPER LOCATION OF INSULATORS:
NOTE: OEM (ORIGINAL EQUIPMENT MANUFACTURE) Stock Steel tube/Washer.
You are now finished! Please re-check all mounting hardware on a frequent basis and after every off road
trip. Keep on Jeepin'!
PAGE 3 of 4