Instruction manual

ENGLISH

If the blades are not synchronised, one or more of

the following faults may have occurred in the cut-

ting deck:

• The positive drive belt has slipped on the gear

wheels.

• Torque limiting between gear wheels and blade

shaft has deployed. The arrows in fig. 20 must

be opposite each other for an intact deck. When

torque limiting has deployed, the arrows are not

opposite each other.

• The blade member is incorrectly installed on

the blade shaft. Can be installed in three differ-

ent positions. See 18:R.

In the event of incorrect synchronisation according

to the two first alternatives, contact an authorised

GGP workshop for repair.

6 SPARE PARTS

GGP genuine spare parts and accessories are de-

signed specifically for GGP machines. Please note

that ‘non-genuine’ spare parts and accessories

have not been checked or approved by GGP:

The use of such parts and accessories

can affect the function and safety of the

machine. GGP accepts no responsibility

for damage or injuries caused by such

products.

7 DESIGN REGISTRATION

This product or parts thereof is covered by the fol-

lowing design registration:

Sweden: 66 166

Germany: 499 11 740.9

France: 577 251-253, 577 439-443

USA: 435 564

GGP reserves the right to make alterations to the

product without prior notification.