Specifications

INSTALLATION (cont.)

Power Supply and Field Wiring Connection (For Classic

60 ONLY)

Power Supply

• AC 460 V±10 %, 3 phase and 60 Hz. Do not connect the unit to any other power

supply.

• The power supply should be a dedicated single outlet circuit with a UL approved

short-circuit and ground fault protective breaker with a recommended fuse size

of 20 A (20 A maximum).

• Securely tighten each terminal.

CAUTION: Use a specified 20 A fuse. Do not use wiring, copper wire or

soldering instead of the fuse. The use of non-specified fuses can cause

machine failure or fire.

CIRCUIT BREAKER WITH

GROUND-FAULT PROTECTIVE

FUSE 20 A (20 A MAX.)

RS TG

TERMINAL BLOCK OF Classic 60

GROUNDING

TERMINAL

GREEN

COLORED WIRE

POWER SOURCE

AC 460 V, 3 PHASE, 60 Hz