Specifications

41
TROUBLESHOOTING (cont.)
If conditions persist after the above actions have been taken, turn the unit off,
disconnect the power and contact your MovinCool reseller or a qualified technician.
CONDITION POSSIBLE CAUSE REMEDY
Alarm coming
from unit and unit
stops.
Receiving fire alarm signal
input
Check the fire alarm system and
confirm that there is no signal input to
the unit. The unit returns to the normal
operation after the problem is fixed and
the controller is RESET or the wall
thermostat has been turned off and on.
To RESET: Hold down the SET TEMP
( / ) buttons simultaneously for 3
sec.