Specifications

INSTALLATION (cont.)

Plugging in the Unit

• Check the prongs and surface of the power cord plug for dust/dirt. If

dust and/or dirt are present, wipe off with a clean, dry cloth.

• Check the power cord, plug and prongs for damage or excess play.

If any damage or excess play is found, contact your MovinCool

reseller for repair.

• Fully insert plug into the A/C outlet.

WARNING:

• If the power cord or plug is damaged, repair should only be

performed by qualified electrical personnel.

• Do not connect/disconnect the power cord or attempt to

operate buttons with wet hands. This could result in electrical

shock.

CAUTION: The AC outlet (208/230 VAC Single Phase, 60Hz) needs

to be rated at 50A or higher. Do not share the outlet with any other

instrument or equipment.

NOTE:

• Make sure the AC outlet is free of dirt, dust, oil, water, or any

other foreign matter.

• The Office Pro 60 model is equipped with an approved NEMA

plug configuration (S42). The appropriate outlet must be used

for this plug type.