Manual

CHEMFLO
®
8 HYDRAULIC
3" x 1-1/2" End Suction Centrifugal Pump
Made with high quality investment cast 316 stainless steel components,
the ChemFlo
®
series of pumps are designed to be applied in a wide range
of pumping applications where stainless steel is required.
The ChemFlo
®
8 hydraulic pumps utilize an enclosed impeller designed for
achieving higher heads and efficiencies than a standard semi-open
impeller. Multiple hydraulic flows allow the ChemFlo
®
8 to meet most duty
points up to 395 GPM and total head up to 305 feet. Several mechanical
seal options are available in addition to the standard type 2100 carbon /
ceramic / Viton mechanical seal.
ChemFlo
®
8 hydraulic pumps are offered with a 1.59 cubic inch
displacement motor for hydraulic flows up to 26 GPM and a maximum
pressure of 2400 PSI.
SPECIFICATIONS:
PSI . . . . . . . . . . . . . . . . Up to 134
Suction and Discharge . . 3" x 1-1/2" 125# ANSI flange
Materials of Construction 316 stainless steel
Stainless steel
Flow . . . . . . . . . . . . . . . Up to 395 GPM
Head Feet . . . . . . . . . . . Up to 310'
Impeller . . . . . . . . . . . . 8.0" enclosed, cast 316 stainless steel
Drive Options . . . . . . . . Hydraulic motor 1.59 cu. in.
Seal . . . . . . . . . . . . . . . Special seal material combinations available
(consult factory)
Standard carbon / ceramic / Viton
Application:
Agricultural•
Commercial•
Industrial•
Marine•
OEM•
Hydraulic Fluid Flow:
Up to 26 GPM•
Hydraulic Motor:
Gear•
Hydraulic System Pressure:
Up to 2400 PSI•
Options:
Hydraulic motors with flow control•