Network Device Specification Sheet

Print Server

The perfect solution for migration of coax or twinax

AFP/IPDS printers into an Ethernet network

The MPI Tech LAN Brick Eth 10 is the only and obvious choice when existing

coax- and twinax attached AFP/IPDS printers should be moved into an

Ethernet LAN environment.

The solution preserves existing investments into AFP/IPDS printing

equipment as well as it removes the need for double cabling systems.

The MPI Tech LAN Brick is designed for Ethernet networks and supports

10Base-2 (coax BNC connector) and 10Base-T (RJ45 connector) networks.

The LAN Brick operates with IBM PSF/MVS, IBM PSF/400, IBM PSF/2 and PSF

for AIX Version 2.1 to provide LAN connectivity for IBM compatible midrange

IPDS printers.

Preserves Existing Investments

Supports Coax or Twinax Printers

True Migration

No Changes Nescessary

Supports TCP/IP

LAN Brick™

Printing and Conversion Solutions

PAGE 1
The perfect solution for migration of coax or twinax AFP/IPDS printers into an Ethernet network Print Server LAN Brick™ ! Preserves Existing Investments The MPI Tech LAN Brick Eth 10 is the only and obvious choice when existing coax- and twinax attached AFP/IPDS printers should be moved into an ! Supports Coax or Twinax Printers ! True Migration Ethernet LAN environment.
PAGE 2
Attachment Indirect LAN IPDS Printing Requirements LAN BrickTM Eth 10 S/370 - S/390 Ethernet 10Base-2 (IEEE 802.3) at 10 Mbps PSF for MVS rel. 2.1 or higher incl. PTFs Ethernet 10Base -T (IEEE 802.3) at 10 Mbps Approvals UL, cUL, CE Safety AS/400 AFP/IPDS System Support OS/400 V3R1 or higher incl.